Polysealant is a custom-engineered flexible butyl blend sealant for use in a wide range of applications including:
Polysealant bonds instantly to joint surfaces and to itself. Always butt ends together - never overlap. Leave the protective release paper on sealant during application and remove only when ready to couple using appropriate pressure. Joint surfaces should be clean and dry.
Due to the high adhesive quality of Polysealant, priming of the joints normally is not required. However, should wet or unusual applications exist we offer PolyPrimer adhesive. Simply coat the joint surface and allow to dry at least ten minutes prior to installation.
This is to certify that Polysealant, a pre-formed flexible butyl rubber mastic, complies with current standards and specifications required by Federal, State and local regulatory agencies and meets or exceeds the requirements of AASHTO M-198B and ASTM C-990. It is considered safe for potable drinking water storage facilities.
| Test Specification | Required | Obtained |
|---|---|---|
| Butyl rubber, min % | 50 | 56 |
| Ash-Inert Mineral Matter, min % | 30 | 44- |
| Volatile Matter, % max | 2 | less than 1 |
| Specific Gravity at 77°F | 1.15-1.50 | 1.27 |
| Ductility at 77°F, min | 5 | 10 |
| Flash Point, COC, min | 350 | 365 |
| Fire Point, COC, min | 375 | 387 |
| Rebound Test at 77°F | 3-15 | 11 |
| Compression at 77°F, max | 100 | 57 |
| Compression at 32°F, max | 200 | 106 |
| Cone Penetration at 77°F dmm | 50-100 | 85 |
| Cone Penetration at 32°F dmm | 40 min | 43 |
| Low Temp Flexibility | PASS |
| Elevated Temp Flow | PASS |
| Adhesion after Impact | PASS |
| 5% Sulfuric Acid | PASS |
| 5% Sodium Hydroxide | PASS |
| 5% Hydrochloric Acid | PASS |
| 5% Potassium Hydroxide | PASS |
| 5% Saturated Hydrogen Sulfide | PASS |
NON-TOXIC AND ASBESTOS FREE
| Description Size | Rolls per Carton | Feet per Carton |
|---|---|---|
| 1/2" x 21' | 10 | 210 |
| 3/4" x 14' 6" | 10 | 145 |
| 1" x 14' 6" | 8 | 116 |
| 1-1/4" x 14'6" | 5 | 72.5 |
| 1-1/2" x 10' | 5 | 50 |
New Packaging! 45 Cartons per pallet
Available in 5 Gallon Pails
Recommended Size: 1 1/2 inch coils
| Box Section Tongue Permimeter |
Recommended Amount | |||
|---|---|---|---|---|
| SPAN | RISE | Total Linear Ft. |
No. Coils Required |
|
5 ft. |
2 ft. |
16.76 |
1.7 |
|
3 ft. |
18.75 |
1.9 |
||
4 ft. |
20.76 |
2.1 |
||
5 ft. |
22.76 |
2.3 |
||
6 ft. |
3 ft. |
21.30 |
2.2 |
|
4 ft. |
23.30 |
2.4 |
||
5 ft. |
25.30 |
2.5 |
||
6 ft. |
27.30 |
2.8 |
||
7 ft. |
4 ft. |
25.80 |
2.6 |
|
5 ft. |
27.80 |
2.8 |
||
6 ft. |
29.80 |
3.0 |
||
7 ft. |
31.80 |
3.2 |
||
8 ft. |
4 ft. |
27.80 |
2.8 |
|
5 ft. |
29.80 |
3.0 |
||
6 ft. |
31.80 |
3.2 |
||
7 ft. |
33.80 |
3.4 |
||
8 ft. |
35.80 |
3.6 |
||
9 ft. |
5 ft. |
32.30 |
3.3 |
|
6 ft. |
34.30 |
3.5 |
||
7 ft. |
36.30 |
3.7 |
||
8 ft. |
38.30 |
3.9 |
||
9 ft. |
40.30 |
4.1 |
||
10 ft. |
5 ft. |
34.80 |
3.5 |
|
6 ft. |
36.80 |
3.7 |
||
7 ft. |
38.80 |
3.9 |
||
8 ft. |
40.80 |
4.1 |
||
9 ft. |
42.80 |
4.3 |
||
10 ft. |
44.80 |
4.5 |
||
12 ft. |
6 ft. |
41.80 |
4.2 |
|
7 ft. |
43.80 |
4.4 |
||
8 ft. |
45.80 |
4.6 |
||
9 ft. |
47.80 |
4.8 |
||
10 ft. |
49.80 |
5.0 |
||
11 ft. |
51.80 |
5.2 |
||
12 ft. |
53.80 |
5.4 |
||
Notes: These estimates are based on an annular space of 1/2 inch.